Size Range:
Label Size: Minimum 230 mm x 280 mm; Maximum 820 mm x 1200 mm
Thickness: 80 - 130 g/m2. From very light paper to light weight board. Consult sales representative.
Substrate Size: Minimum 200 mm x 250 mm; Maximum 790 mm x 1200 mm
Thickness: Up to 4 mm
Operators Needed:
One operator and one material handler.
Production Speed:
Up to 42 cycles per minute depending on size, type of material, glue, and operator skill.
Construction Materials:
SHEET MATERIAL: Printed paper, embossed paper, coated paper, backed vinyl, cloth or tyvek.
SUBSTRATES: One piece, two piece or prejoined substrates. Chipboard, corrugated board, wood, masonite, plastic or other stiff substrates.
Glue Capacity:
75 liters (19.81 gallons) for hot animal glue.
System available for cold glue.
Registration Accuracy:
Up to ± 0.5 mm at registration point.
Spotting Range:
From 10 mm inside the substrate edge for inside lining to as much as 25 mm outside the substrate edge for automatic wrapping.
Standard Equipment:
Automatic sheet gluer, suction conveyor belt, glue system with glue viscosity control pumps, automatic substrate feed and registration module, and wrapper module.
Optional Equipment:
Oversize substrate, stacker, side discharge on wrapper, roll away wrapper.
Energy Requirements:
ELECTRICAL:
230 V, 60 Hz, 20 kva or
380 V, 50 Hz, 20 kva
Supplied as standard.
AIR: 700 L/min @ 5.6kg/cm2 (6 Bar)
WATER: 10 mm (3/8") cold water line at normal pressure; no drain required.
Shipping:
WEIGHT: 3650 kg; skidded
Advertised machine production speeds and product quality are based on materials selected by Crathern or actual production reported by our customers. The selection of materials used by each customer is their sole responsibility and will directly affect the product quality and output of the machine.
Due to continuous product improvements, we reserve the rights to change or discontinue specifications, designs and manufacturing locations shown in this brochure without notice and without incurring obligation.
