Crathern Machinery Group Model GVC-1 Glue Viscosity Control Pump

GVC controls proper viscosity
Less wash up at the end of the day
Automatically adds water as required
Can be fitted to most gluing machines

Glue Flow:
Approximately 2 L/min; flow varies with glue viscosity.

Standard Equipment:
Pump with automatic water dispensing system.

Optional Equipment:
Automatic fill system for glue pan (for non-recirculating systems). Hot water heater.

Energy Requirements:
ELECTRICAL: None.
AIR: 28 L/min @ 5.6kg/cm²
WATER: 10 mm (3/8") diameter line from hot side of glue tank or from hot water tank at normal house pressure. Drain not required.

Shipping:
WEIGHT: 18 kg

Click here or on the system flow diagram above to see a full view of this image.

Advertised machine production speeds and product quality are based on materials selected by Crathern or actual production reported by our customers. The selection of materials used by each customer is their sole responsibility and will directly affect the product quality and output of the machine.

Due to continuous product improvements, we reserve the rights to change or discontinue specifications, designs and manufacturing locations shown in this brochure without notice and without incurring obligation.